FOR OPERATORS OF LARGER EXISTING BUILDINGS

FOR OPERATORS OF LARGER EXISTING BUILDINGS

Energy, redefined

— up to 30% lower heating costs for your building*

Lower heating costs. A better indoor climate. More control over your building.

climIoT automatically monitors and controls energy consumption and temperature in buildings — visible, controllable and demand-based, for commercial properties, care facilities and municipal buildings. With no cabling, operational downtime or renovation required.

  • No wiring
  • No interruption to operations
  • No renovation required

*Actual savings depend, among other things, on the building, heating system, usage patterns and initial conditions.

Energy, redefined

— up to 30% lower heating costs for your building*

Lower heating costs. A better indoor climate. More control over your building.

climIoT automatically monitors and controls energy consumption and temperature in buildings — visible, controllable and demand-based, for commercial properties, care facilities and municipal buildings. With no cabling, operational downtime or renovation required.

  • No wiring
  • No interruption to operations
  • No renovation required

*Actual savings depend, among other things, on the building, heating system, usage patterns and initial conditions.

Smart technology. Simple to implement.

climIoT combines sensors, IoT and intelligent data analysis in a solution that can be integrated into existing buildings — with no renovation or new cabling required.

Learn more about the system →

Smart technology. Simple to implement.

climIoT combines sensors, IoT and intelligent data analysis in a solution that can be integrated into existing buildings — with no renovation or new cabling required.

Learn more about the system →

Trusted by businesses and municipalities

View reference projects →

Who is it for

WHO IT'S FOR

One solution. Many buildings.

climIoT can be used wherever energy consumption, indoor climate and operating costs come together — in existing buildings with 50 or more radiators, whether commercial properties, care facilities or municipal buildings.

One solution. Many buildings.

climIoT can be used wherever energy consumption, indoor climate and operating costs come together — in existing buildings with 50 or more radiators, whether commercial properties, care facilities or municipal buildings.

Commercial & real estate

climIoT optimises heating costs and indoor climate in office buildings, commercial properties and larger sites — with no investment in complex new building technology. Many buildings already have heating systems, thermostats and control technology; what is usually missing is not technology, but transparency, data and intelligent control.

Care facilities

Continuous temperature monitoring with automatic analysis and documentation. Alerts for critical temperatures — relieving care staff of routine checks without replacing professional care decisions.

Municipalities & public buildings

Municipal buildings offer significant potential for energy savings. climIoT provides the data foundation needed to make energy consumption and room temperatures transparent, identify optimisation opportunities and control building operations according to demand.

This enables town halls, schools, daycare centers and sports halls to use energy more effectively, reduce operating costs and optimize energy consumption step by step. Lower energy consumption can help reduce the CO₂ emissions associated with building operations.

Who is it for

Live simulation

Automatic real-time hydraulic balancing

Without hydraulic balancing, heating water takes the path of least resistance: nearby radiators receive too much flow, while more distant ones remain undersupplied—even when the valve is fully open.climIoT thermostats continuously measure room temperature and adapt the flow to the actual heating demand. This distributes heat according to demand—without the manual calculation required for conventional hydraulic balancing.This can help reduce heating costs and energy consumption while supporting a balanced indoor climate.No calculations required. More dynamic.

Controlled according to demand.

OG links OG rechts · fern EG links · nah EG rechts 19°C 16°C 24°C 21°C

Ohne Abgleich wird EG links überversorgt (24 °C), OG rechts bleibt kalt (16 °C) — selbst bei voll geöffnetem Ventil.

Automatic real-time hydraulic balancing

OG links OG rechts · fern EG links · nah EG rechts 19°C 16°C 24°C 21°C

Ohne Abgleich wird EG links überversorgt (24 °C), OG rechts bleibt kalt (16 °C) — selbst bei voll geöffnetem Ventil.

Without hydraulic balancing, heating water takes the path of least resistance: nearby radiators receive too much flow, while more distant ones remain undersupplied—even when the valve is fully open.climIoT thermostats continuously measure room temperature and adapt the flow to the actual heating demand. This distributes heat according to demand—without the manual calculation required for conventional hydraulic balancing.This can help reduce heating costs and energy consumption while supporting a balanced indoor climate.No calculations required. More dynamic.

Controlled according to demand.

The perfect indoor climate in three steps

Assessment

You provide us with the relevant information about the building and its radiators, or our team carries out an on-site survey. Based on this information, we develop a tailored solution for your building.

Setup & installation

The climIoT thermostats are preconfigured at the factory and only need to be installed on site—either by you or by our team, with no structural modifications required. Your team will then receive an introduction to the system.

Assessment

You provide us with the relevant information about the building and its radiators, or our team carries out an on-site survey. Based on this information, we develop a tailored solution for your building.

Setup & installation

The climIoT thermostats are preconfigured at the factory and only need to be installed on site—either by you or by our team, with no structural modifications required. Your team will then receive an introduction to the system.

Energy management goes live

After the initial instruction, the system runs automatically: hydraulic balancing and room-by-room control continuously adjust heating operation to actual demand. Energy consumption and operating data are recorded continuously, making changes and saving potential transparent.Automatically controlled. Continuously recorded. Transparently optimised.

Funding

Your investment may be eligible for funding

climIoT is eligible for funding as a heating optimisation measure — hydraulic balancing is one of the recognised individual measures under the current BEG funding programme.

Make a no-obligation enquiry now

BEG individual measures · Non-residential buildings

Up to 15% grant for eligible individual measures


Those wishing to improve the energy efficiency of existing non-residential buildings can benefit from attractive grants under the Federal Funding for Efficient Buildings programme (BEG – individual measures).


Eligible measures include metering, control and regulation technology, as well as heating optimisation measures.

For eligible measures, the subsidy is generally 15% of the eligible costs. The terms and eligibility depend on the specific measure, the building and the applicable funding conditions.

climIoT connects everything: Measure. Control. Optimise.

As of September 2026, following the BEG reform of 21 July 2026. No guarantee is given — funding conditions and documentation requirements are subject to review by BAFA. For applications, we recommend consulting with your energy or tax adviser.

Your investment may be eligible for funding

climIoT is eligible for funding as a heating optimisation measure — hydraulic balancing is one of the recognised individual measures under the current BEG funding programme.

Make a no-obligation enquiry now

BEG individual measures · Non-residential buildings

Up to 15% grant for eligible individual measures


Those wishing to improve the energy efficiency of existing non-residential buildings can benefit from attractive grants under the Federal Funding for Efficient Buildings programme (BEG – individual measures).


Eligible measures include metering, control and regulation technology, as well as heating optimisation measures.

For eligible measures, the subsidy is generally 15% of the eligible costs. The terms and eligibility depend on the specific measure, the building and the applicable funding conditions.

climIoT connects everything: Measure. Control. Optimise.

As of September 2026, following the BEG reform of 21 July 2026. No guarantee is given — funding conditions and documentation requirements are subject to review by BAFA. For applications, we recommend consulting with your energy or tax adviser.

Ready to lower your heating costs?

With our free savings potential analysis, you can find out in just a few minutes how much potential for savings your building holds.

Free energy-saving potential analysis